Miele HR 1124-3 AG Installation Instructions Manual page 19

Mounting the RBGAG All Gas
Backguard
The rear of the Range must be
accessible.
Mount the backguard before installing
the anti-tip device and connecting the
Range.
 Undo the screws from the island trim.
 Pull back the island trim slightly until
it can be removed.
2
a Extender
b Air duct
 Insert one extender  onto each of
the left and right air ducts .
 Screw the extenders  into place
with 2 screws each.
1
2
Notes on installation
1 2
a Backguard
b Rear backguard panel
c Interior panel
 To avoid scratching the backguard
, place it front side downward on a
soft surface (e.g., a blanket). The
lower edge should line up with the
edge of the table so that the
backguard is lying flat.
 Remove the screws from the rear of
the backguard.
 Remove the rear  and interior 
panels.
3
19