What to do in an emergency
OUN066103L
15. If the inflation pressure is 1.3 bar
(19 psi) or more, turn the On/Off
switch to the "I"-position and
adjust the inflation pressure to
the recommended inflation pres-
sure (Refer to "Tyres and wheels"
in section 8). Reduce any exces-
sive pressure by using the pres-
sure release valve (10).
16. Turn kit off by pressing "O".
Unscrew the hose from the tyre
valve and unplug the electric plug
from the socket.
6
22
17. Do not unscrew the bottle. Stow
the TyreMobilityKit safely in the
vehicle.
WARNING
After the sealing compound has
been used, the max. permissible
speed is 80 km/h (50 mph) and
the damaged tyre is to be
replaced promptly, at least with-
in a distance of 200 km (120
miles). If while driving, you
experience any unusual vibra-
tion, ride disturbance or noise,
reduce your speed and drive
with caution until you can safe-
ly pull off of the side of the road.
Call for road side service or
towing.
18. Drive to the next vehicle or tyre
dealer to replace the tyre.
WARNING
After a long period without driv-
ing, the inflation pressure must
be checked before driving.
19. After using the TyreMobilityKit to
seal your tyre, replace the hose,
the sealing compound and con-
nected parts. See last page of
this instruction. When replacing
the damaged tyre inform the tyre
mechanic that a sealing com-
pound was used before the tyre
is demounted!