Table of Contents
Advertisement
Step 4
Prepare the M.2 standoff that comes
with the package. Then hand tighten
the standoff into the desired nut
location on the motherboard. Align
B
A
and gently insert the M.2 (NGFF)
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
B
A
20
o
Step 5
Tighten the screw that comes with
the package with a screwdriver to
secure the module into place.
NUT2
NUT1
B
Step 6
2
Tighten the screw with a screwdriver
1
to secure the module and M.2
heatsink into place. Please do
2
not overtighten the screw as this
might damage the module and M.2
heatsink.
30
Advertisement
Chapters
Table of Contents
