Jonsered CS 2141 Workshop Manual page 40

Repair instructions
Air intake system – removal
The air intake system comprises:
• inlet manifold
• insulating plate with clip
• carburettor fl ange
• impulse hose
• support ring
1
Remove:
• cylinder cover
• air fi lter
• carburettor
• HT lead
• starter assembly (CS 2141, CS 2145)
• Fuel tank (CS 2141, CS 2145)
2
Unbolt the vibration damping spring between the
cylinder and hand grip.
40
– English
3
Unscrew and remove the bolt from the silencer
support.
4
Unscrew the four cylinder bolts. Lift up the cylinder
so that the intake system insulating plate is free of
the crankcase.
On models CS 2141 and CS 2145 there are cylin-
der bolts on the underside.