Canon NP6512 Service Manual page 26

CHAPTER 2 STANDARDS AND ADJUSTMENTS
3. Routing the Forwarding Cable
1) Fit the longer end forwarding cable (black) [2] on the top hook of the cable drive pulley [1], and
wind it 1.5 times. Then, secure the shorter end [3] as shown with adhesive tape [4].
2) Lead the longer end [5] along the cable drive pulley [1] as shown, and hook it on the pulley [6]
on the right front side.
2-16
[4]
[3]
Figure 2-25
[1]
Figure 2-26
Face without a marking
[2]
[1]
[5]
[6]