Sony VPL-VW90ES Operating Instructions Manual page 65

IR Receiver
Blanking
Selects the remote control detectors (IR Receiver) on the front
and rear of the projector.
Front & Rear: Activates both the front and rear detectors.
Front: Activates the front detector only.
Rear: Activates the rear detector only.
This feature allows you to adjust the displayable region within
the four directions of the screen.
Select the edge to adjust by highlighting Left, Right, Top, or Bottom
using the M / m buttons.
Adjust the amount of blanking using the < / , buttons.
Note
When both the "Blanking" and the "V Keystone" are adjusted at the
same time, the "Blanking" cannot be adjusted correctly. When using
the "Blanking," make sure that you set the "V Keystone" to "0."
65