Table of Contents
Advertisement
Available languages
Available languages
installation
EN
4.2
minimum mantel clearances
WARNING
!
•
When using paint or lacquer to finish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
TOP OF TRIM KIT
BOTTOM OF APPLIANCE
4.3
trim kit installation
1. Remove the two screws on one side of the front
glass.
10
W415-1755 / 05.03.17
23 3/8"
(59.4cm)
29 3/8"
(74.6cm)
2. Secure the side trim and front glass using the
previously removed screws. Ensure slots face
inwards and the bottom of the trim is flush with
the bottom of the appliance. Repeat steps 1 and 2
on opposite side.
Advertisement
Chapters
Table of Contents
