Table of Contents
Advertisement
6. Push
and pull the child restraint in different
To rernove
the child restraint, just unbuckle the vehicle's
safety belt and remove the lockirlg clip. Let the safety belt
go back all the way. The safety belt will move freely again
and be ready to work for an adult or larger child passenger.
directions to be.
sure
it.
is secure.
Lap-Shoulder Belt System B
You'll be using the lap-shoulder belt.
See the earlier part about the top strap if the child
restraint has one.
1. Put the restraint on the seat. Follow the instructions
for the child restraint.
2. Secure the child in the child restraint
a s
the
instructions
s a y .
portions of the vehicle's safety belt through or around
3. Pick up the latch plate, and run the lap
and
shoulder
the restraint.
The
child restraint instructions will show
you how. Tilt the latch plate to adjust the
belt if
needed.
If' the shoulder belt goes in .front
of the
child's
face
or
neck, put
it.
behind the child restraint.
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.
4. Buckle the belt. Make sure the release button is
,
."
.,
r
5 . To tighten the belt, pull the shoulder belt while you
push down
011
the child restraint.
1-36
Advertisement
Table of Contents
