Viewing A Video - Sony COM-2 Operating Instructions Supplement 1 Addendum

If the recording continues to fail unintentionally with the WIRELESS LAN switch set to

"OFF, " an error may occur to the file system. The following message is displayed: "Failed
to continue recording video. If the WIRELESS LAN switch is ON, please turn it OFF. "
In this case, formatting of the save destination may recover the file system. Backing
up data on the destination to your PC, etc., before formatting the destination is highly
recommended, because all of the data on it will erased.
If an incoming Skype call occurs during recording, the recording will be stopped.


Viewing a video

On the Standby screen, tapping the thumbnail at the bottom right starts the
playback of the last shot video. To go back to the Standby screen, tap the BACK
button.
Hint
You can also play back the video by tapping "Video" on the Home menu.

Changing to the still camera/changing the save to destination of
videos
Select the desired item from the OPTION menu on the Standby screen to take
a photo or to change the save to destination.
Item
Still Camera
Save To
Video Camera supported formats
Supported file format:
Memory Stick Video Format
Supported video codec:
MPEG-4 Simple Profile
Bit rate: 384 kbps
Frame rate: 15 fps
Resolution: 320 × 240
Supported audio codec:
AAC-LC
Bit rate: 64 kbps
Sampling frequency: 24 kHz
Result or setting options
Changes to still camera for taking photos.
Sets the media to which videos are saved.
<Memory Stick/Internal Memory>