Table of Contents
Advertisement
2
Button for:
>
Confirming selected display or set val-
ues
>
Calling up computer information
3
When the lights are on: instrument lighting
brightness
95
Exiting displays
The outside temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
Setting the units of measure
You can change the units for fuel consumption,
route/distance, temperature and pressure.
1.
"Settings"
2.
"Language/Units"
3.
Select the desired menu item.
4.
Select the desired unit.
The settings are stored for the remote control
currently in use.
Online Edition for Part no. 01 41 2 603 066 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 603 066 - © 08/09 BMW AG
4
Calling up Check Control
5
Checking engine oil level
6
Setting the time
71
7
Setting the date
8
Viewing service requirement display
Service requirements
The remaining driving distance and the date of
the next scheduled service are displayed briefly
immediately after you start the engine or switch
on the ignition.
The extent of service work required can
be read out from the remote control by
your BMW Service
For certain maintenance operations, you can
view the respective distance remaining or due
date individually in the instrument cluster.
1.
Switch on the ignition, refer to page 54.
2.
Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the words "SERVICE-INFO".
3.
Press button 2.
77
219
75
76
73
Advisor.<
73
Hide quick links:
Advertisement
Table of Contents
