Using The Sleep Function; Using The Eco Mode Function - Sony KLH-W26 Operating Instructions Manual

Using the Sleep Function

You can set the display to turn off automatically after
a predetermined period of time (15, 30, 45, 60, 90 or
120 minutes).
While "Sleep Timer" is activated, the PIC OFF/
TIMER indicator on the display lights up in orange.
To cancel Sleep Timer
Press SLEEP repeatedly until "Sleep Timer : Off"
appears or turn the display power to off then turn on
the display again.
Notes
• If you turn the display off, and then turn it on again, "Sleep
Timer" returns to "Sleep Timer : Off".
• "Sleep Timer - power down" appears one minute before
the display shuts off. This message may not appear if you
are performing other operations in the settings.
• You can set "Sleep Timer" to on using the "Setup"
settings. Select "Sleep Timer" in the "Setup" settings, then
set it to "15 min", "30 min", "45 min", "60 min", "90
min", or "120min".
• While "Sleep Timer" is activated, if you press SLEEP
once, the time remaining until the display shuts off will be
displayed.
14
GB

Using the ECO Mode Function

You can reduce the power consumption of the display.
To cancel the ECO Mode
Press POWER SAVING button repeatedly until
"ECO Mode : Off" appears.
Notes
• If you turn off the display when the "ECO Mode" is
activated, the mode stays on next time you turn on the
display except "Picture Off".
• You can set the "ECO Mode" using the "Setup" settings.
Select "ECO Mode" in the "Setup" settings, then set it to
"Off", "Low", "High", or "Picture Off".