Turn Signals; Wiper System; Headlamp Flasher - BMW 2006 7 Series Owner's Manual

Turn signals/

headlamp flasher

1 High beams
2 Headlamp flasher
3 Turn signals
Using turn signals
Move the lever beyond the resistance point.
If you wish to manually control the shut-off of
the turn signal, then only push the lever to the
resistance point.
Atypically rapid flashing of the indicator
lamps signals the failure of a turn signal
lamp, possibly in the trailer when
Temporarily signaling
Push the lever to the resistance point and hold it
there for as long as you wish to signal.
Triple turn signal activation
Press the lever to the resistance point; the turn
signal flashes three times.
Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG

Wiper system

1 Switching on wipers
2 Switching off wipers or for brief wipe
3 Activating/deactivating rain sensor
4 Cleaning windshield, headlamps and
BMW Night Vision camera
5 Adjusting rain sensor sensitivity level
Switching on wipers
The lever automatically returns to its initial posi-
tion when released.
Normal wiper speed
towing.<
Press once.
The system reverts to operation in the intermit-
tent mode when the vehicle is stationary.
Fast wiper speed
Press twice or press beyond the resistance
point.
The system reverts to normal speed when the
vehicle is stationary.
Rain sensor
The rain sensor controls the wiper operation as
a function of the rain intensity. It is located on
the windshield, directly in front of the inside
rearview mirror.
*
65