Table of Contents
Advertisement
2.
Turn the controller until "Time" is selected
and press the controller.
3.
Turn the controller until "Set time" is
selected and press the controller.
Making settings
1.
Turn the controller to set the hours and
press the controller.
2.
Turn the controller to set the minutes and
press the controller.
The changed time is stored.
Switching on hour signal*
You will hear three tones just before each full
hour.
Select "Hour memo" and press the controller.
The hour signal is activated.
Setting time format
1.
Select "Time format" and press the control-
ler.
2.
Select the desired format and press the
controller.
The setting is stored for the remote control cur-
rently in use.
Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG
Setting date
1.
Select "Date" and press the controller.
2.
Select "Set date" and press the controller.
The first section of the date display is high-
lighted, in this case the month.
3.
Turn the controller to make the adjustment.
4.
Press the controller to apply the setting.
The next setting is highlighted.
5.
Make the remaining adjustments. After the
last adjustment, the date is stored.
Changing date format
1.
Select "Date format" and press the control-
ler.
2.
Select the desired format and press the
controller.
The setting is stored for the remote control cur-
rently in use.
Brightness of Control Display
The brightness is automatically adapted to the
ambient lighting conditions. However, you can
change the basic setting.
1.
Select "Brightness" and press the control-
ler.
83
Advertisement
Chapters
Table of Contents
