*1: Transmit the next command 3 seconds Power On and Power Off commands are transmitted. If not,correct data may not be able to be acquired.
*2: KLH-W26/W32 does not have this function.
*3: This unit automatically detects the input signal. Therefore changing in automatically if not setting a kind of signal. (RGB and Component, PC and VIDEO in
HDMI etc)
*4: Restricts the following key operations.
[Remote Commander]
Menu, Picture, Sound, ECO (Power Saving), Sleep, Contrast+/_, Brightness, Chroma, H Shift, V Shift, V size, PAP
[Main]
Menu
*5: HDMI Signal Detect is Enable only when the signal is in Stable.
*6: In the case of two windows, returns Signal Status of Active Window.