Disassembly And Assembly Instructions - Panasonic CQ-VD5005W Service Manual

5 Disassembly and Assembly Instructions

5.1. How to Remove the Flexible PCB
Disassembly of Display Unit
Front Panel
. Remove the two screws(
Front Panel
2. After removing the screw (
the Connector Cover.
3. Disconnect the FFC (CNP3), which is connected to
the Front Panel, from CN707 on the Main PCB (E-3173Aa).
Front Panel
4.Remove the Front Panel.
Front Panel
) from the Front Panel.
) from the bottom side, remove
Connector
Cover
CN707
FFC (CNP3)
Monitor
1. Pull out the Monitor to the arrow direction.
Monitor
2. After removing the two screws (
remove the Plate.
Plate
3. After removing the four screws (
4. Disconnect the FPC Ass'y from CN452 on the TFT
.
PCB (E-9939A)
CN452
10
) and one screw (
), remove the Monitor Ass'y.
Slide Mechanism
Ass'y
(Monitor Ass'y)
FPC Ass'y
),