Quick Start Guide - Sony EBS-SP10 User Manual

SP-TUNE User Manual
Fig. 1 IR Remote
ON
STBY
ENTER
VOLUME +
VOLUME -
ARROWS
CHROMA
ID OFF
CONTRAST +
CONTRAST -
0..9, digits

4 Quick Start Guide

1. Make sure the SP-TUNE unit and the Sony Display are both disconnected from power.
2. Connect the SP-TUNE unit to the Sony Plasma Display using the supplied cable harness. Each
cable on the harness is labeled for the appropriate connection. Make certain to plug the Control
S phono connector into the Control S output of the display.
3. Connect the appropriate video source to input connectors of SP-TUNE (see "Connections"
chapter for details).
4. Connect audio input/output to the 8-pin mini-DIN connector of SP-TUNE (see "Connections"
chapter for details).
5. The RJ11 should be left unconnected as it is for Sony service purposes only.
may occur if plug into a phone line or other RJ-11 connectors unintended for the port. This will
void the warranty.
Function
Switch Power on
Switch Power off
Select option in menu
Also finishes input in dialog panels
Raises volume level
Lowers volume level
When menu active – move the cursor
up/down/left/right
Exit the current menu or dialog
Displays the Menu
Channel Up
Channel Down
When no dialog input active – directly enter
tuner channel number to switch to.
When dialog input active – enter digits.
Warning: Damage
4