Table of Contents
Advertisement
Installing the palm-rest and keyboard assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
Place the palm-rest and keyboard assembly on a flat surface.
NOTE: When replacing the palm-rest and keyboard assembly, the solid-state drive mounting brackets have to be transferred
from the old palm-rest and keyboard assembly to the replacement palm-rest and keyboard assembly.
Next steps
1. Install the
power
button.
2. Follow the procedure from step 4 to step 20 in
3. Install the touchpad.
4. Install the
rear
I/O-cover.
5. Install the battery.
6. Install the
display
assembly.
7. Install the
wireless
card.
8. Install the
memory
module.
9. Install the
I/O
board.
10. Install the
2230 solid-state drive
11. Install the
2230 solid-state drive
12. Install the
base
cover.
13. Follow the procedure in
Installing the system
or
2280 solid-state drive in SSD slot
or
2280 solid-state drive in SSD slot
After working inside your
board.
one, whichever applicable.
two, whichever applicable.
computer.
69
Advertisement
Table of Contents
