Eagle 128 Installation And Operation Instructions Manual page 26

location. This way, the bracket can be installed so that it covers the
hole, holds the cable in position and results in a neat installation. Some
customers, however, prefer to mount the bracket to the side of the cable
hole — it's a matter of personal preference. After drilling the hole, pass
the connector up through the hole from under the dash.
Front view (left) and side view (right) showing dimensions of the other
Cuda family sonar units when mounted on quick release bracket.
If you wish, you can fill in the hole around the cable with a good marine
caulking compound. (Some marine dealers stock cable hole covers to
conceal the opening.) No matter what type of installation you prefer, be
sure to leave enough slack in the cable to allow tilting or swiveling the unit.
For the Cuda 168EX
If you choose to fill in the cable hole, be sure to position the cable against
the rear edge of the hole as you apply the fill material.
107.5
[4.23]
12.09 [0.48]
76.9
[3.03]
156
[6.26]
Millimeter
[Inch]
22
82.7
[3.26]
70.3
[2.77]