Operation; Turning The Tv On And Off; Changing Channels; Adjusting The Volume - EQD Auria EQ2288F User Manual

Operation

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the Power button on the front of the
panel.

Changing Channels

1. Using Channel Buttons
Press CH button to change channels, and the TV
changes channels in sequence. You will see all channels
that have been memorized. Channels erased or not
memorized will not be shown.
2. Using Number Buttons
Using the remote control buttons 0-9, select channel for NTSC/ATSC/CATV.
To select 1, 2 or 3-digt channel number (e.g., Channel 110)
Press 1 1 0.
To select 4-digit channel number (e.g. Channel 23-1)
Press 2 3 -

Adjusting the Volume

Press VOL +/- to adjust volume.
To turn off the volume, press MUTE.
To restore volume, press MUTE again, or press VOL +/-
directly.

Viewing the Displayed Information

To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the
screen. (It shows all or some of the information about
Input, Channel, Resolution, Audio Type, etc., depending
on what input source it is in)

Selecting the Input Source

To select the TV or other external input sources connected to the TV.
1.Press the SOURCE button on the remote control.
2.Press to select the required input source between TV,
or
AV,
S-Video, YPbPr, HDMI, or PC.
3.To confirm the selection, press ENTER.

Using the OSD Function

You can use the OSD menus and options to adjust various settings by using
your remote control. There are six options on the screen: PICTURE, AUDIO, TV,
and SETUP.
®
EQD
1.
11
ALEEP POWER
TV AV HDMI/PC YPbPr
INFO
CH VOL
MUTE
INFO
CH VOL
MUTE
INFO
CH VOL
MUTE
SOURCE
TV
AV
S-Video
YPbPr
HDMI
PC
EQ2288F