Air Filter And V-Belt Case Air Filter Elements - Yamaha Majesty YP125E Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
3. If the coolant is at or below the
minimum level mark, remove the
front cowling by removing the
screws.
4. Open the reservoir cap, and then
add coolant to the maximum
level mark.
Coolant reservoir capacity:
0,45 L (0,099 US qt) (0,396 Imp.qt)
CAUTION
If coolant is not available, use
distilled water or soft tap water
instead. Do not use hard water
6
or salt water since it is harmful
to the engine.
If water has been used instead
of coolant, replace it with coo-
lant as soon as possible, other-
wise the engine may not be
sufficiently cooled and the coo-
ling system will not be protec-
ted against frost and corrosion.
If water has been added to the
coolant, have a Yamaha dealer
check the antifreeze content of
the coolant as soon as possi-
ble, otherwise the effective-
ness of the coolant will be
reduced.
5. Close the reservoir cap, and then
install the front cowling by insta-
lling the screws.
ECA10470
Air filter and V-belt case air
filter elements
The air filter and the V-belt case air fil-
ter elements should be cleaned at the
intervals specified in the periodic
maintenance and lubrication chart.
Clean both filter elements more fre-
quently if you are riding in unusually
wet or dusty areas.
6-11
Cleaning the air filter element
2
1. Air filter case cover
2. Screw (x 1)
EAUM1320
1. Place the scooter on the centers-
tand.
2. Remove the air filter case cover
by removing the screws.
3. Pull the air filter element out.
1. Air filter
4. Lightly tap the air filter element to
remove most of the dust and dirt,
1
1