9. Function settings
To adjust the functions of this product according to the installation environment, various types of
function settings are available.
NOTE: Incorrect settings can cause a product malfunction.
9-1. Function settings on indoor unit
By using some components on the PCB, you can change the function settings.
Related components on the PCB and the applicable settings:
DIP switch
¢ Component location
Components on the indoor unit main PCB used for the function settings are located as shown in
the following figure.
9-1. Function settings on indoor unit
Component
1
SW101
2
3
SW101
3
2
1
Setting content
Drainage function setting
Auto louver grille setting
Fan delay setting
- 64 -
9. Function settings