Rs232 Setting; Control Command Diagram; Control Sequence - Dukane ImagePro 8947 Specification

1. RS232 Setting

Baud rate:
Parity check:
Data bit:
Stop bit:
Flow Control
Minimum delay for next command: 1ms

2. Control Command Diagram

The command is structured by the Header code, command code, data code
and end code. Most of the commands are structured except some for the
compatibility issue with other projectors.
Header code
HEX 7Eh
ASCII '~'

3. Control Sequence

The projector may send a return code after it received a command. If the
command isn't received correctly, the projector will not send the return code
Projection Display Serial Interface Spec.
9600
None
8
1
None
Command code Data code
Command
Command
3/13
End code
Data 0Dh
Data
CR