Nokia 6650 Service Manual page 14

nokia
C P
ONNECTING EOPLE
Customer Care EMEA
Technical Services, Repair Concepts
To separate the UI-PWB from Engine Shield use SRT-6
only. Place it between UI-PWB and Engine Shield and
slide along the edge carefully as shown in the picture.
Then use the opening tool as a lever.
Remove the Light Guide by opening the snaps.
Remove the Microphone from its guidance carefully.
Do not damage the spring contacts.
Camera Module drops out when turning B-Cover.
Service Manual 6650 Level 1&2
PAGE 14 (25)
Confidential
Now, the UI-PWB, Engine PWB and Engine Shield can
be separated from each other.
To remove the DC Jack, place tweezers between the
spring contacts and under the Jack. You'll need to use
additional force to pull the Jack upwards.
Remove the Vibra Motor from its guidance
Remove the IR Window as shown in the picture.
Copyright 2003-2004 © Nokia Corporation
Approved 2.0
DJk
21.01.2004