NHM-7
Troubleshooting and Tuning Instructions
•
Change TXPA mode to "low"from the drop down menu. When the PA mode
is changed, the previous values are saved in memory and the ones for new
mode are shown .
•
Tune power levels 19, 15 and 7 (Levels 5 & 6 are not used, base level tuning
not needed)
•
Press "Calculate coefficients"
Typical values: EGSM900
3RZHU OHYHO
%DVH
•
If values shown are within limits select "Stop" and check "Save values to
phone permanent memory"
•
Select "Yes" to save values to phone
3DJH
3$ KLJK PRGH
1RNLD &RUSRUDWLRQ
PAMS Technical Documentation
3$ ORZ PRGH
,VVXH