2112 (RH-57)
Troubleshooting - RF
Figure 30: (Top) PWB. (Bottom left) A zoomed view of the Jedi LO/PLL input match components on the UHF
synthesizer layout (Bottom right) A zoomed view of the Jedi LO/PLL input match components UHF synthesizer
Rx VHF
Following are possible causes for an incorrect Rx VHF frequency:
• Power supplies to the PLL portion of Yoda IC (N700) are missing or low (VR7)
• Loop filter or resonator components are missing or incorrectly installed
• 19.2MHz reference clock is missing or low (C510)
• Programming is incorrect
Note: See the Schematics chapter for an Rx VHF schematic.
Page 40
layout with part numbers.
©2004 Nokia Corporation
Nokia Customer Care
Company Confidential
Issue 1 07/2004