For Windows 7 / Vista / Server 2008 Users - Oce fx2081 User Manual

For Windows 7 / Vista / Server 2008 users

IMPORTANT
Make sure that you followed installation steps 1 to 9 described on
1-3 through
10
Plug the USB cable into your machine and then connect it to your com-
puter.
NOTE
Be sure to use a shielded USB cable. Use of an unshielded cable
may result in radio interference.
11
Turn on your machine.
12
The driver software will be installed automatically.
13
When the drivers have been installed correctly, the following message
will appear.
The driver installation is completed.
NOTE
If your machine has a device option(s), go to "Activating the device
option(s) on Windows 7 / Vista / Server 2008" on the next page.
1-4.
Connect
pages
1-5