Samsung WW8-J4 Series User Manual page 51

Code
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
Ub
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an "Ub" check message
will be shown in the display.
Check the motor for operation.
• Try restarting the cycle.
3C
• If the information code remains, contact a customer service
centre.
The electronic control needs to be checked.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
UC
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
High temperature heating check.
HC
• If the information code remains, contact a customer service
centre.
The Water Level sensor is not working properly.
• Turn the machine off, and restart the cycle.
1C
• If the information code remains, contact a customer service
centre.
Check communications between main and sub PBAs.
• Turn the machine off, and restart the cycle.
AC
• If the information code remains, contact a customer service
centre.
The MEMS sensor is not working properly.
• Turn the machine off, and restart the cycle.
8C
• If the information code remains, contact a local Samsung
service centre.
Action
English 51