Proximity Switch; Pressure Sensor; Water Proof - Sony XPERIA ST25i Test Instructions

Tests: Service Tests

2.2.22 Proximity switch

The previous 'Speaker' test should have been
successfully carried out before doing this test!
Make sure the phone is not in 'silent mode' before
performing this test.
When entering into the test, the screen shows 'Proximity
switch OFF' and a tone is emitted.
Once your finger cover the proximity switch area (on the left
side of the receiver), the screen will show 'Proximity switch
ON' with a different type of tone.
Press the Back key to return to the Service Test Menu.

2.2.23 Pressure Sensor

Not applicable, do not use.
Press Back key to return to Service Test Menu.

2.2.24 Water Proof

Not applicable, do not use.
Press Back key to return to Service Test Menu.
1263-4090 Rev 2
© Sony Mobile Communications AB – Company Internal
Test Instruction Repair Instruction Mechnical
15(22)