Smartswitch Web-Base Controller; Configuring Your Lan - Asus GX1026i User Manual

Smart ethernet switch
Table of Contents

Advertisement

SmartSwitch Web-Base Controller

The GX1026i contains the SmartSwitch Web-Base Controller, a web-based
preinstalled software, which makes it easier for you to manage and monitor the
switch and the network devices connected to it.

Configuring your LAN

Before running SmartSwitch, you need to configure the Local Area Network (LAN)
settings of your computer. By default, GX1026i IP address is 192.168.2.1, and the
Subnet Mask is 255.255.255.0.
®
Windows
98/98 SE
1. From your Windows
2. Double-click the Network icon, and select the Configuration tab.
3. Select TCI/IP, then key in the IP address for the switch. The IP address must
be 192.168.2.X. (X can be any number between 2 and 254 that is not used by
another device.)
4. Set the Subnet Mask to 255.255.255.0. Click OK when finished.
Windows
®
1. From your Windows
Internet Connection > Network Connections.
2. Right-click the Local Area Connection icon, then select Properties.
3. Double-click the Internet Protocol (TCP/IP) item to display the Internet
Protocol (TCP/IP) Properties window.
4. Select the Use the following IP address option, then key in the IP address
for the switch. The IP address must be 192.168.2.X. (X can be any number
between 2 and 254 that is not used by another device.)
5. Set the Subnet Mask to 255.255.255.0. Click OK when finished.
Windows
®
1. From your Windows
Sharing Center > Manage Network Connections.
2. Right-click the Local Area Connection icon, then select Properties.
3. Select Internet Protocol version 4 (TCP/IPv4), then click Properties.
4. Select the Use the following IP address option, then key in the IP address
for the switch. The IP address must be 192.168.2.X. (X can be any number
between 2 and 254 that is not used by another device.)
5. Set the Subnet Mask to 255.255.255.0. Click OK when finished.
8
GX1026i Smart Ethernet Switch
®
desktop, click Start > Settings > Control Panel.
2000/XP platform
desktop, click Start > Control Panel > Network and
®
Vista platform
desktop, click Start > Control Panel > Network and
®

Advertisement

Table of Contents
loading

Table of Contents