General Safety Information; Replacing The Lamp - Dukane ImagePro 8039B User Manual

General Safety Information

Ø
Do not open the unit case. Aside from the projection lamp, there
are no user-serviceable parts in the unit. For servicing, contact
qualified service personnel.
Ø
Follow all warnings and cautions in this manual and on the unit
case.
Ø The projection lamp is extremely bright by design. To avoid
damage to eyes, do not look into the lens when the lamp is on.
Ø Do not place the unit on an unstable surface, cart, or stand.
Ø
Avoid using the system near water, in direct sunlight, or near a
heating device.
Ø
Do not place heavy objects such as books or bags on the unit.
Power Safety
Ø Only use the supplied power adapter.
Ø
Do not place anything on the power cord. Place the power cord
where it will not be in the way of foot traffic.
Ø
Remove the batteries from the remote control when storing or not
in use for a prolonged period.

Replacing the Lamp

Ø Replacing the lamp can be hazardous if done incorrectly. Refer to
"Replacing the Projection Lamp" on page 27 for clear and safe
instructions for this procedure.
Ø
Unplug the power cord.
Ø Allow the lamp sufficient time to cool.
– iii –
Preface