Table of Contents
Advertisement
Installation
4. Re-place the upper case of the reader. Put the reader
and the cable into the 3.5" drive bay, then secure the
unit with screws.
5. Connect the USB cable to the internal USB connector
on the mainborad. About the position and direction
of the Internal USB connector, please refer to the
manual of your mainboard.
6. Cover the upper case of the computer and plug the
power back, then power on the computer.
7. While entering the system, the computer will detect
and register new device.
8. Depending on the sockets the reader equipped, there
should be 4 Removable Disk icons added into My
Computer.
9. Installation completes.
Guide
Hardware Setup
10
Advertisement
Table of Contents
