Table of Contents
Advertisement
Working with the map
6. Via the arrow buttons select Route information:
7. Tap the command buttons to display (On) or not (Off) the
respective information on the map.
The desired information on the entire route (upper section)
and on the current stage (lower section) will be displayed at
the right hand side of the map.
Section
Line 2
Line 3
Line 4
8. Tap Save to save the modifications.
The modifications will be taken over and displayed on the
map.
USER'S MANUAL XNAV3550
Information
This symbol means "route". All
information displayed below refers to
the final destination.
This symbol means "stage". All
information displayed below refers to
the next route point. This section is only
available if you have indicated more
than one destination to navigate to.
ETA (Estimated time of arrival).
Remaining time to arrival (estimated).
Remaining distance to arrival
(estimated).
- 69 -
Advertisement
Table of Contents
