GRIND BUTTON OPERATION
In order to switch the Auto Darkening Goggle from a Cutting or Welding
Shade into Grind Mode first locate the plastic button on the top and left side
of the Auto-Darkening Goggle. After the button has been located press and
hold it for 3 seconds. A green LED inside of the goggle should blink every 3
seconds after the button is pressed to indicate you are in Grind Mode. To
switch back to the previous Cutting or Welding shade simply press and hold
the button for 3 seconds. Grind mode is intended for grinding only not for
welding.
8