Installation Of Indoor Unit; Connecting The Installation Pipe And Drain Hose To The Indoor Unit - LG MULTI V ARNU07GTUA4 Engineering Product Data Book

Indoor unit
10. Installation

10.2.2 Installation of Indoor Unit

1. Hook the indoor unit onto the upper portion of
the installation plate.( engage the three hooks at
the top of the indoor unit with the upper edge of
the installation plate) Ensure that the hooks are
properly seated on the installation plate by mov-
ing it left and right
Installation plate
2. Unlock the tubing holder from the chassis and
mount between the chassis and installation
plate in order to separate the bottom side of the
indoor unit from the wall.
* The feature can be changed according to type of
model.
Tubing Holder
Connecting the installation pipe
and drain hose to the indoor unit.
1. Align the center of the pipes and sufficiently
tighten the flare nut by hand
Indoor unit tubing Flare nut Pipes
2. Tighten the flare nut with a wrench
Wrench
Indoor unit tubing
3. When needed to extend the drain hose of indoor
unit, assembly the drain pipe as shown on the
drawing
Drain pipe
Adhesive
Wall Mounted Unit (Standard)
Open-end wrench
(fixed)
Flare nut
Connection
pipe
Indoor unit drain hose
Vinyl tape(narrow)
_ 31