Windshield Wiper Blade Replacement; License Plate Lamp; Replacement Bulbs - Buick Lucerne 2007 Owner's Manual

License Plate Lamp

To replace one of these bulbs, do the following:
1. Remove the license plate.
2. Reach up through the opening above the
license plate to access the two license
plate lamps.
3. Turn the socket counterclockwise to remove.
4. Grasp the bulb in the socket and pull
straight out.
5. Push the bulb straight into the socket until it
clicks to secure it.
6. Reverse Steps 1 through 3 to reinstall the
bulb socket.

Replacement Bulbs

Exterior Lamps
Back-up Lamp
Sidemarker, License Plate Lamp,
and Auxiliary Taillamp
Stoplamp, Taillamp, and Turn
Signal Lamp
For replacement bulbs not listed here, contact
your dealer.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for
wear or cracking. See Scheduled Maintenance
on page 442.
It is a good idea to clean or replace the wiper
blade assembly on a regular basis or when worn.
For proper windshield wiper blade length and
type, see Normal Maintenance Replacement Parts
on page 453.
Bulb Number
921
194
3057K
383