Ride Control System Messages; Airbag System Messages; Service Park Assist; Service Stabilitrak - Buick 2011 Enclave Owner's Manual

5-36 Instruments and Controls
Press the set/reset button or the
trip odometer reset stem to
acknowledge this message and
clear it from the DIC display. For
more information see

SERVICE PARK ASSIST

If your vehicle has the Ultrasonic
Rear Parking Assist (URPA) system,
this message displays if there is a
problem with the URPA system.
Do not use this system to help you
park. See
for more information.
See your dealer for service.
Ride Control System
Messages

SERVICE STABILITRAK

This message displays if there is
a problem with the StabiliTrak
system. If this message appears,
try to reset the system. Stop; turn off
the engine for at least 15 seconds;
then start the engine again. If this
message still comes on, it means
there is a problem. See your dealer
for service. The vehicle is safe to
drive, however, you do not have the
. benefit of StabiliTrak, so reduce
your speed and drive accordingly.
SERVICE TRACTION
CONTROL
This message displays when there
is a problem with the Traction
Control System (TCS). When this
message is displayed, the system
will not limit wheel spin. Adjust your
driving accordingly. See your dealer
for service. See
TRACTION CONTROL OFF
This message displays when the
Traction Control System (TCS) is
turned off. Adjust your driving
®
accordingly. See
information. This message clears
itself after 10 seconds.
for more information.
for more
TRACTION CONTROL ON
This message displays when the
Traction Control System (TCS) is
turned on. See
for more information.
This message clears itself after
10 seconds.

Airbag System Messages

SERVICE AIR BAG
This message displays if there is a
problem with the airbag system.
Have your dealer inspect the
system for problems. See
more information.
and
for