Verify Panasonic Clutch Tools On Applications
Application Specifications – Record to Worksheet
1.
Specs – Obtain the target torque, tolerance, extensions and socket/bit for the application.
•
2. Set Up Tool – Update Worksheet
Adjust The Torque – Use the clutch adjustment tool to increase (cw) or decrease (ccw) the output
•
torque.
Program The Tool – Program the tools speed to meet the application and enable additional quick
•
features if necessary.
3. Verify The Tool In The Calibration Lab – Update Worksheet
Set Up Transducer – Set up the Analyzer/Software per the settings recorded in the worksheet.
•
Adjust Simulator – Adjust the Joint Simulator to the joint type recorded in the worksheet.
•
Transducer – Warm up the Joint Simulator and Tool before testing. Run 10 cycles on the joint
•
simulator to get the components warmed up and grease moving.
Run The Tool – Run the tool on the Transducer with the Joint Simulator.
•
4. & 5. Run The Tool On The Application – Update Worksheet
•
Run The Tool - Run the tool on the application and be sure to hold the trigger until the tool shuts off.
•
Audit The Fastener - Conduct a residual audit of the fastener to verify accuracy.
•
Adjust Torque - If the torque is out of specification, adjust the tools clutch to increase or decrease
the torque until the residual audit is within specification.
6. Record / Tool History
Worksheet – Update the worksheet with the above information if any changes were made to the
•
tool, settings or attachments.
Panasonic Assembly
Tools Set Up Worksheet
Panasonic Life Solutions Company of America Assembly Tools Division
2 Riverfront Plaza 5
www.panasonic.com/assemblytools
th
Floor Newark, NJ 07102