x Analog
Factory default setting
Video Input Assign
Lets you set the video input jack(s) assigned to
each input.
For details, see "Using other video/audio input
jacks" (page 82).
x HDMI
HDMI IN 1/2/3/4/5, none
x Component
COMPONENT IN 1/2, none
x Analog
Factory default setting
104
US
Network Settings
You can adjust the settings for the network.
Internet Settings
Lets you check or change the network settings.
You can change the settings for the following
items either manually or automatically.
– IP Address
– DNS
– Proxy Server
Connect the receiver to the network
beforehand. For details, see "5: Connecting to
the network" (page 41).
Connection Server Settings
Lets you set whether or not to display the
connected DLNA server.
Renderer Options
x Renderer Name
Shows the renderer name of the receiver.
x Auto Access Permission
Sets whether or not to allow automatic access
from newly detected DLNA controller.
Renderer Access Control
Lets you set whether or not to accept
commands from DLNA controllers.
External Control
Let you turn the function which controls the
receiver from "ES Remote" on the home
network on or off.
x Off
x On