GoPro HERO 2 Manual page 79

to viEW PHotos And vidEo on A tv oR Hdtv
Using an hDMi cable (not included), plug your hD hERO2 camera into your TV. You
can also use the composite port and a composite cable (not included).
once connected:
With the camera powered On, navigate to the Playback setting
using . Press
Within the playback menu, use
select each item. the menu list options are:
video: Displays all video files on the sD card. During playback, volume
adjustment can be made via the TV. Playback will begin automatically.
Photo: Displays all photo files on the sD card.
All (default): Displays all photo and video files on the sD card.
Exit: Exits the playback menu.
PRo tiP:
to Forward, press
to Reverse, press
to Exit playback at anytime, eject the
hDMi/Composite cable from the camera
notE: Make sure your camera is set to the correct nTsC (north America)
or PAl (outside north America) video settings or your camera will not work
properly with your TV. You must also have an sD card with recorded information
loaded into your hD hERO2 camera. if there are no video or photo files stored
on your sD card you will see a no video, no Photo, or no Files message.
‣ see ntsC/PAl for more information.
transferrInG fIles
to enter the Playback menu.
to toggle through the menu list. Use
to Fast Forward, hold down
to Rewind, hold down
to navigate back to the menu list while in playback,
hold down both and together for 3 seconds
to
79