D-Link DGS-1210-28P Manual page 4

device.
2. Open the web browser from the workstation and enter the IP address of the switch. The
switch's default IP address is 10.90.90.90.
3. Enter administrator's password when prompted. The password is admin by default.
4. To update switch's firmware or configuration file, select Tools > Firmware Backup &
Upgrade from the
5. Two methods can be selected : HTTP or TFTP
6. Select HTTP to upgrade the firmware to or from your local drive of PC.
a. Click Browse to browse your inventories for a saved firmware file
b. Click Upgrade after selecting the firmware file you want to restore
c. Click OK to continue with firmware upgrade
d. Click OK to continue with firmware upgrade
e. Wait until the "Firmware Upgrade Successful" message pops up and login again after device
boots up.
DGS-1210-28P Firmware Release Notes
banner.
v
4