Listening To Music; This Unit - Sony DR-BT160AS Operating Instructions Manual

OPERATING THE UNIT

Listening to music

Check the following before
operating the unit.
– The Bluetooth device is turned on.
– Pairing of this unit and the
Bluetooth device is complete.
– The Bluetooth device supports the
transmitting music function
(profile: A2DP*).
1
Press and hold the
POWER button for
about 2 seconds while
the unit is turned off.
The indicator (blue) and
indicator (red) flash together
twice and the unit is turned on.
Note
After the unit is turned on, the unit
attempts to connect to the last
connected Bluetooth device
automatically with HFP or HSP.
VOL +
POWER button
VOL –
When not calling with this unit, do
not make the last connected Bluetooth
device ready for HFP or HSP
connection. To make or receive a call
while playing back music, see page
23.
2
Make the Bluetooth
connection (A2DP) from
a Bluetooth device to

this unit.

Refer to the operating
instructions supplied with the
Bluetooth device on how to
operate it.
3
Start playback on the
Bluetooth device.
Tip
Bluetooth connection of A2DP (Advanced
Audio Distribution Profile) can also be
operated with the jog switch from this
unit to the Bluetooth device except when
making a call on this unit.
Notes
• When you play music by connecting the
unit to a Bluetooth device using HSP
(Headset Profile), sound quality will not
be high. For better sound, change the
Bluetooth connection to A2DP by
operating the Bluetooth device.
• If this unit is turned off while an A2DP
Bluetooth connection is established,
operate the unit again from step 1 to
make the A2DP Bluetooth connection
again.
* For detail on profiles, see page 6.
Continued
17
US