Technical Safety Checks (Tsc) - Siemens MOBILETT Plus Maintenance Instructions Manual

General
1.14

Technical Safety Checks (TSC)

Abbreviation: TSC = Technical Safety Checks
NOTE
Technical Safety Checks,
Test certificate - check
1 Identification data
2 General checks
2.1 Visual inspection: Is there any damage
affecting safety?
2.2 Are all cables and cable guides firmly
attached and in place, without any visible
damage?
Siemens AG
Medical Solutions
•
Within the purview of DIN VDE 0751-1, the operator of medical
engineering products has to perform technical safety checks at
regular intervals.
•
The checks listed in these maintenance instructions contain all
technical safety checks according to DIN VDE 0751-1 – except
for the checks regarding the completeness, presence and legi-
bility of the necessary operator documents.
•
A separate protocol with print number SP00.000.834.01... is
available for each technical safety check.
•
Within the purview of DIN VDE 0751-1, we recommend docu-
menting the maintenance results both in the maintenance pro-
tocol and in the TSC protocol. The protocols should be filled
out completely and handed over to the client after maintenance
is completed.
•
In the table below, each technical safety check listed in docu-
ment SP00.000.834.01... is assigned to the corresponding
maintenance work.
SPR8-215.831.04.03.02
07.05
Maintenance instructions - check/
Comments
Please fill in the fields.
n.a.
2.1.1 Damage, checks:
SIM Covers
SIM Cassette compartment
SIM Control and display panel
SIM Exposure release cable
SIM Single tank generator
SIM Collimator
2.2.10 Mains cable, checks:
SIM Cable winder
SIM Damage
SIM Protective conductor
2.2.12 Arm cable harness, check:
SIM Damage
Page 19 of 64
CS PS 24
19
MOBILETT Plus/ -E/ -M