TABLE OF CONTENTS PAGE PAGE 1 SERVICE NAVIGATION ------------------------------------------3 1.1. INTRODUCTION -------------------------------------------3 1.2. Important Notice 1:(Other than U.S.A. and Canadian Market) -----------------------------------------3 1.3. About the Lens Unit ---------------------------------------3 2 INITIAL SETTINGS ------------------------------------------------4 3 DIAGRAMS ----------------------------------------------------------7 3.1. Overall Block Diagram ------------------------------------7 3.2.
1 SERVICE NAVIGATION 1.1. INTRODUCTION This Service Manual contains technical information which will help service personnel to understand and service the Digital Camera Digital Camera; DMC-FS62 series The Digital Camera DMC-FS62 series have been developed based on DMC-FS6 series. Since this Service Manual does not cover the same part which is already described in the Service Manual for DMC-FS6 series, when servicing, refer to the descriptions in the Service Manual for ;...
2 INITIAL SETTINGS After replacing the MAIN PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following procedure in accordance with model suffix of the unit. 1. IMPORTANT NOTICE: Before proceeding Initial settings, be sure to read the following CAUTIONS. 2.
Page 5
[CASE 1. After replacing MAIN P.C.B.] When MAIN P.C.B. has just been replaced, all of the model suffix is displayed as follows. (Four pages in total) [CASE 2. Other than “After replacing MAIN P.C.B.”] • Step 5. Chose the model suffix in “INITIAL SETTINGS”: (Refer to “CAUTION 1”) [Caution: After replacing MAIN P.C.B.] The model suffix can been chosen, JUST ONE TIME Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
Page 6
• Step 7. CONFIRMATION: Confirm the display of “PLEASE SET THE CLOCK” in concernd language when the unit is turned on again. When the unit is connected to PC with USB cable, it is detected as removable media. 1) As for your reference, major default setting condition is as shown in the following table. •...
4.1. Frame & Casing Section COMPARISON CHART: The following table shows difference between DMC-FS6 series and DMC-FS62 series. Ref No. Original Part No. New Part No. Part Name & Description Remarks DMC-FS6 series DMC-FS62 series VEP56074A VEP56074E MAIN P.C.B. (RTL) E.S.D. VYK2Y23 VYK3H78 FRONT CASE UNIT...