Recording A Stereo/Sap Program; Unrecordable Pictures; Timer Recording (Standard/G-Code); Setting The Timer Manually (Standard) - Sony RDR-GX310 Operating Instructions Manual

Recording a stereo/SAP program

The recorder can receive and record stereo/SAP
programs.
Stereo programs
When a stereo program is received, the
"STEREO" indicator lights up on the front panel
display. If there is noise in the stereo program, set
"Auto Stereo" in "Options" setup to "Off"
(page 82). The sound will be recorded in monaural
but with less noise.
SAP (Second Audio Program)
When a SAP (Second Audio Program) is received,
the "SAP" indicator lights up on the front panel
display. To record only SAP sound, set "Tuner
Audio" in "Options" setup to "SAP" (page 82).
z Hint
You can select the audio (main or SAP) while recording
bilingual programs using the AUDIO button. This does
not affect the recorded sound.

Unrecordable pictures

Pictures with copy protection cannot be recorded
on this recorder.
When the recorder receives a copy guard signal,
the recorder continues to record but only a blank,
grey colored screen will be recorded.
Copy control Recordable discs
signals
Copy-Free
+ RW
+ R
Copy-Once
- RW
VR
Copy-Never None (a blank screen is
recorded)
* The recorded disc can be played only on CPRM
compatible equipment (page 8).
- RW
- RW
VR
Video
- R
(CPRM*)
Timer Recording (Standard/
G-Code)
+ - RW - RW
RW
VR
Video
You can set the timer for a total of 30 programs, up
to one month in advance.
There are two methods to set the timer: the
standard method and G-Code method.
• Standard: Set the date, time, and program
position of the program manually.
• G-Code: Enter the G-Code number designated
for each TV program (page 43).
b
Note
Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent the
accurate recording of a program.
Setting the timer manually
(Standard)
1 2
4 5
7 8
0
[TIMER]
+ -
R R
3
6
9
</M/m/,,
ENTER
TOOLS
x REC STOP
,continued
41