LG WM22WV26 Owner's Manual page 80

EN 30
OPERATION
3.
Add or remove laundry.
4.
Close the door and press the Start/Pause
button.
CAUTION
• When adding laundry, put it into the drum
completely. If laundry is caught in the door
latch hole, the door gasket may get damaged.
It may cause water leakage and malfunctions.
• Forcing the door open may cause part
damage, destruction, or safety problems.
• If you open the door of drum with a lot of suds
and water, the suds or water may come out. It
may cause burn or make the floor wet.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature is high
inside the drum. It is not possible to add
laundry at this time.
• When the Limpieza de la tina (Tub Clean)
programme is in progress, Añadir prendas
(Add Item) does not work for safety.
Lavado Frío (Cold Wash)
This option saves energy by using cooler water
while increasing the wash and rinse times to
maintain wash performance.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• To cancel the function, the Power button
should be pressed.
• Avoid using liquid detergent for this option.
Extra Enjuague (Extra Rinse)
This option helps ensure the removal of detergent
or bleach residue from fabrics. It will add an extra
rinse to the selected programme.
1.
Press the Power button.
2.
Select a washing programme.
3.
Press the Extra Enjuague (Extra Rinse)
button.
4.
Press the Start/Pause button.
Enjuague+Centrifugado
(Rinse+Spin)
This option can select to rinse and spin a load
separately from a regular programme. This can
be helpful in preventing fresh stains from setting
in fabrics.
1.
Press the Power button.
2.
Press the Enjuague+Centrifugado
(Rinse+Spin) button.
• You can change the Cent. (Spin Speed) by
pressing the Cent. (Spin Speed) button.
3.
Press the Start/Pause button.
Bloqueo de Panel (Child Lock)
( )
Use this option to disable the controls. This
feature can prevent children from changing
programmes or operating the appliance.
Locking the Control Panel
1.
Press and hold the Bloqueo de Panel (Child
Lock) button for 3 seconds.
2.
A beeper will sound, and
Bloqueo de Panel (Child Lock)
turn on and will appear on the display.
When the Bloqueo de Panel (Child Lock) is
set, all buttons are locked except the Power
button.
icon will