Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
AP Network
Wizard
A wizard is available to guide you through first-time setup of the device. Follow the
instructions to complete the process of device configuration. The wizard can be accessed and
run repeatedly by clicking the
Follow these steps of the setup wizard:
1.
On the System Settings page, the Hub connection parameters can be configured. These
settings allow the management computer to connect to the device.
Device Access Address
Device Access Port
Country
icon in the upper-right corner.
Enter the Nuclias Connect Server application's IP
address. To manage remote APs, the IP address must
be a public IP address; You may need to set port
forwarding or IP address mapping between WAN and
LAN for instances behind a firewall or router.
Enter the Nuclias Connect server application's
listening port number. The default value is 8443. For
remote AP management behind a firewall or router,
use this port information for setting port forwarding.
Select your country.
41
AP Network
Advertisement
Table of Contents
