Sony DVP-NS575P Operating Instructions Manual page 24

Connecting to an AV amplifier (receiver) with a digital input jack having
D
a Dolby Digital or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV
amplifier (receiver).
CD/DVD player
COMPONENT
VIDEO OUT
PCM/DTS/
DOLBY DIGITAL
[Speakers]
Rear (L)
Rear (R)
l: Signal flow
z Hint
Use connection
more speakers (6.1 ch or more).
Notes
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "ON" in Quick Setup
(page 25).
24
Y P P LINE OUT
B R
VIDEO
NORMAL
PROGRESSIVE
COAXIAL R AUDIO L
DIGITAL OUT LINE OUT S VIDEO OUT
PCM/DTS/
DOLBY DIGITAL
to DIGITAL OUT
(COAXIAL)
Coaxial digital cord
(not supplied)
to coaxial digital input
AV amplifier (receiver) having
a decoder
Subwoofer
when connecting to 7 or
D
D
COAXIAL
DIGITAL OUT
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set "DTS" to "ON" in Quick
Setup (page 25).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
"48kHz/96kHz PCM" in "AUDIO SETUP" to
"96kHz/24bit" (page 69).
[Speakers]
Front (L) Center
Front (R)