Advertisement
Features
• Supports Bluetooth
• Wireless range: 33 feet
• Supports profile A2DP (Advanced Audio
Distribution Profile)
• Voice prompts announce earbud operations
• Digital volume control
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable lithium
ion battery
Includes
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB charging cable
Overview & Controls
Initial charge time is approximately 2 hours. Charge
fully before use. The low battery indicator will flash for
1 minute, then the unit will automatically power OFF.
• Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
DC Power Input
computer or USB power adaptor (not included) to
Use with USB charging
charge the unit.
cable (included).
Volume Up
Power / Pair /
Play / Pause /
Speakerphone
Press and hold to power
ON or OFF.
Press to play or pause
audio.
Press to answer incoming
phone call.
Volume Down
Microphone
Battery Power
Pairing a Bluetooth Device
If your device should become unpaired, or you find it
is unable to connect normally, repeat the steps below.
1. Power on the unit by pressing and holding the
Play/Pause/Speakerphone/Pair button for 4
seconds. When pairing, remain within 3 feet of the
unit.
2. Using the controls on your Bluetooth device,
select IAEB6 in your Bluetooth settings to pair.
If your device requests a password, enter the default
password 0 0 0 0 .
3. Refer to the user's manual for your specific
device for instructions on pairing and connecting
Bluetooth devices. After initial pairing, the unit will
stay paired unless unpaired manually by the user,
or erased due to a reset of the device.
Playing Audio Wirelessly
1. Use the controls on the connected Bluetooth
device to select and begin playing an audio
track. Audio from the connected Bluetooth device
should now be heard through the earbuds.
2. To play or pause audio, press the Play/Pause
button, or use the controls on the connected
Bluetooth device.
Using the Speakerphone
1. To accept a call, press the Speakerphone button,
or use the controls on the connected phone.
2. To end a call, press the Speakerphone button, or
use the controls on the connected phone.
3. To re-dial the last dialed number, press
the Speakerphone button twice.
Advertisement
