Buffalo AirStation WLI-TX4-G54HP User Manual page 18

Wireless Settings
MAC Address - By default, the Ethernet Converter transmits
its own MAC address, but you may change this so that it
transmits the MAC address of the first device plugged into it
to transmit a data packet.
SSID - In the SSID field, enter the SSID name of the wireless
network that the Ethernet Converter is to connect with. Use
the same SSID as your router/access point. You may find
available broadcasting SSIDs by pressing the Search button.
Wireless Network Type - Choose between Infrastructure
(Access Point Based) or Ad-hoc (Client to Client).
Wireless Channel - The channel will be automatically selected in Infrastructure networks.
For Ad-hoc networks, both clients must be set to the same channel.
Wireless Mode - The wireless mode only applies to Ad-hoc connections. If the Ethernet
Converter is making an Ad-hoc connection with an 802.11b client, then select 802.11b
from the drop down menu. If an 802.11g client is connecting to the Ethernet Converter
then select the Auto-802.11g-802.11b option.
BSS Basic Rate Set - The basic rate set only applies to Ad-hoc connections. Select the
proper rate set for the Ad-hoc client the Ethernet Converter is going to associate with.
Older routers may require that you reduce the BSS Basic Rate set to Default(11b). If you
are unsure of the correct setting, try Default.
1