Router/Access Point Mode Switch - Buffalo Tech Nfiniti Airstation WHR-G300N User Manual

Router/Access Point Mode
The AirStation may be used as either a full wireless router or a simple access point. The
switch has three positions:
ON (Router Mode) - The default LAN-side IP address is 192.168.11.1 and DHCP and NAT are
enabled.
OFF (AP Mode) - The default LAN-side IP address of the AirStation is 192.168.11.100, and
DHCP and NAT are disabled. The WAN port becomes a fifth LAN port.
AUTO - The AirStation will attempt to detect another router on the network. If one is
detected, it will switch to AP Mode, but get its IP address from the router's DHCP. If no
router is detected, then the AirStation will switch to Router Mode. AUTO is the default
setting, and is recommended for most users.
1